Our Products

Rotary Evaporator

Laboratory equipment

Jacketed Reactor

Contact Us

Pump Station Design Guidelines Second Edition

Pump Station Design Guidelines Second Edition

2020-5-26 · Pump Station Design Guidelines . Example: in designing a water booster station for a residential neighborhood, a detailed pipe analysis of the network, including its physical characteristics and flow demands, would be necessary. Rather than delve deeper is .

High-efficiency Energy Saving Technology of Hangzhou .

High-efficiency Energy Saving Technology of Hangzhou .

2016-10-12 · for circulating pumps in water cooling system (Patent No.: 201310062873.0), and Method and device for reducing circulating pump lift of high-level circulating water system (Patent No.: ZL201010204888.2). "Optimal Cooling Process of Cooling CWSs", "Automatic Control Technology for

How to do Pump Piping with Layout Explained | PIPING GUIDE

How to do Pump Piping with Layout Explained | PIPING GUIDE

2020-2-28 · Pump location will affect the piping layout and how the piping can be supported. Pumps in flammable service shall be located outboard of overhead pipe-racks or structures. Those in non-flammable service may be located beneath the pipe-rack (subject to allowance in client specifications). Pumps shall be located as close as possible to the source .

Finally! A decent alternative to hot water recirculating .

Finally! A decent alternative to hot water recirculating .

The system includes a small pump that goes under the sink in the bathroom furthest from the water heater. You get buttons to press for hot water in every room with hot water (these can be wired or wireless). When the homeowner needs hot water, they press the button and the pump moves water from the hot water line into the cold water line under .

Sizing a Minimum Flow Recirculation Line - Engineered .

Sizing a Minimum Flow Recirculation Line - Engineered .

The pump manufacturer provides this value. Typical problems that can occur with sustained operation below the minimum flow are: an excessive temperature rise of the pumped fluid, higher radial bearing loads, higher axial thrust, and excessive noise and vibration all of which can greatly reduce the life of the pump.

Design method for impeller of high specific .

Design method for impeller of high specific .

2003-1-2 · Based on the two-dimension theory, a computer code is made in FORTRAN language to design the high specific speed mixed-flow pump. The theory and method in calculating meridional velocity distribution by streamline iteration, drawing blade shape .

Hydrogen circulation system model predictive control for .

Hydrogen circulation system model predictive control for .

2020-8-7 · Hydrogen circulating pump is widely used to circulate the hydrogen from the anode and re-import it into the gas supply manifold in front of the anode of PEMFC [10,11]. Anode hydrogen supply system is an important component of the fuel cell, which regulates the hydrogen mass flow rate and pressure of anode to ensure the efficient and stable .

Commercial heating | Grundfos

Commercial heating | Grundfos

2020-8-15 · Grundfos offers pump solutions and system know-how that can help you design and build the most efficient commercial buildings, whether you need air conditioning systems, fire protection, wastewater handling, pressure boosting, or heating. Whatever you need, call Grundfos as soon as you start designing.

Application, Selection & Installation Guide

Application, Selection & Installation Guide

2019-2-4 · Find the table below that best describes the design you plan to use. Select the pump model based on the supply and return pipe length, size and pump options. Do not oversize the pump or high velocity noise and erosion corrosion of system piping may result. Model Model # 003 006 008 003-IFC* 006-IFC* 008-IFC* Supply Pipe Maximum Length (ft.) 50 .

Designing Domestic Hot Water Recirculation Systems: Part 2 .

Designing Domestic Hot Water Recirculation Systems: Part 2 .

This pump will cost about 4 times as much as the standard booster but will eliminate the overheating and reduce the speed when there is usage in the building. Next week we will look at the control of the circulating pump. Check out the rest of the Designing Domestic Hot Water Recirculation Systems Series: Part 1: Determining the Flow Rate

How to Size a Solar Water Pumping System | altE Bog

How to Size a Solar Water Pumping System | altE Bog

Now to find the Sumbersible Solar Pump that Fits the Bill. So we now know that this family in Ohio will need a submersible pump that is capable of pumping at least 1.11 GPM and up 88ft of head.With just those two pieces of data we can go and drill down to any of the submersible solar pumps specification pages and there will be a chart for each pump that will tell us what each model can do for .

Domestic Hot Water Recirculation Part 4: Pump Sizing Example

Domestic Hot Water Recirculation Part 4: Pump Sizing Example

By Chad Edmondson. Designing a domestic hot water recirculation system is not typically difficult. In fact, we see the exact same model recirculation pump used in application after application without incident, as this one pump is typically able to meet the minor head and .

How to Avoid Problems With Your Hydronic System Pumps .

How to Avoid Problems With Your Hydronic System Pumps .

2010-12-9 · A circulating pump cannot push air down a vertical pipe. Each system high point requires a vent in order to purge air out of the system. A gurgling sound at the return side of a radiator is evidence of a partially air-bound radiator.

Designing Domestic Hot Water Recirculation Systems: Part 1 .

Designing Domestic Hot Water Recirculation Systems: Part 1 .

Domestic Hot Water Recirculation Steps; Part 1 – Find the Pump GPM. Determine the heat loss of the total supply pipe using tables or rules of thumb. Calculate the GPM required using a 10°F ΔT or other value as determined by the engineer. Compare that to ½ GPM times the number of balance valves and choose the larger value.

Kai Qi Jin - Senior Project Manager/ Senior .

Kai Qi Jin - Senior Project Manager/ Senior .

1, Following the master to finish the design of the Jilin Qifeng annual output of 40,000 tons of acrylic fiber project. Including the distribution design for the spinning workshop, liquid workshop, circulating water pump room, and some other process workshop,etc.

Forced Circulation Evaporator - Swenson Technology

Forced Circulation Evaporator - Swenson Technology

The circulating pump is usually of the axial-flow, single-elbow design, well suited for the high flow rates and low pressure drops in Swenson-designed circulating systems. These heavy duty pumps operate at low speeds, which minimize erosion and reduce maintenance. Circulating piping interconnects the vapor body, the heat exchanger, and the pump.

Manual for the Design of Pipe Systems and Pumps

Manual for the Design of Pipe Systems and Pumps

2020-6-11 · The first step on the way to the optimal pump is the selection between a centrifugal pump or a positive displacement pump. The difference lies on one hand in the prin-ciple of transpor-ting the liquid and on the other hand in the pumping characteristic. There are two types of centrifugal pumps: "non-self priming" and "selfpriming".

Design Considerations for Hot Water Plumbing

Design Considerations for Hot Water Plumbing

2015-8-5 · PART -1 ESTIMATING HOT WATER DEMAND An adequate supply of hot water is a must for showers, kitchens, bathrooms, washing machines, dishwashers and other appliances in homes, motels, hotels or commercial

Why You Should Use Circulating Pumps in Parallel & Series .

Why You Should Use Circulating Pumps in Parallel & Series .

2010-12-15 · Using circulating pumps in parallel or series configurations can attain many economic and operational gains as opposed to using one large pump to supply a system's pumping requirements. Employing a combination of in-line pumps rather than base-mounted pumps to accomplish a pumping requirement eliminates the need for pump mounting pads .

Pump Sizing Calculation

Pump Sizing Calculation

2019-7-28 · Pump Sizing does the hydraulic calculation for a centrifugal pump and estimates differential head, hydraulic power, motor power, NPSH available.

Commercial heating | Grundfos

Commercial heating | Grundfos

2020-8-15 · Grundfos offers pump solutions and system know-how that can help you design and build the most efficient commercial buildings, whether you need air conditioning systems, fire protection, wastewater handling, pressure boosting, or heating. Whatever you need, call Grundfos as soon as you start designing.

The Do's & Don'ts of Hydronic System Design | 2000-05-03 .

The Do's & Don'ts of Hydronic System Design | 2000-05-03 .

Designing high performance hydronic heating systems involves a knowledge of fluid mechanics, electricity, heat transfer and control theory. Designing high performance hydronic heating systems requires a good understanding of fluid mechanics, electricity, heat transfer and control theory, not to mention a myriad of architectural issues. It's a field where there's always something new to learn .

Basic Design Considerations for Geothermal Heat Pump .

Basic Design Considerations for Geothermal Heat Pump .

2017-8-2 · Design of the ground-coupling • Sizing of the ground-coupling for a heat pump is different than sizing conventional equipment. – The capacity of the ground to absorb or provide heat is a transient heat transfer problem. – The thermal state of the ground is determined by prior heat addition/extractions rates and durations. – While significant imbalance of heat extraction/heat rejection .

The System Approach to Designing a Low Velocity .

The System Approach to Designing a Low Velocity .

2017-8-28 · Describing a Swimming Pool Circulating System The system contained herein has been separated into three modules. The components are very familiar to many. The primary pump and motor, pipes, skimmers, filters, heaters, hydro jets, cleaners, chlorinators, sheer descents, etc. MODULE 1 is called the Acquisition Module.

How to find pump size and pump head calculation (with .

How to find pump size and pump head calculation (with .

Another example is the flow rate of a cooling water pump circulating water through a heat exchanger is defined by the amount of heat transfer required. Total Differential Head The total differential head a pump must generate is determined by the flow rate of liquid being .

Circulating pumps Catalogue - Tadmur Trading

Circulating pumps Catalogue - Tadmur Trading

2010-2-10 · designing and manufacturing water pumps providing our customers quality products and concrete solutions. Nocchi line is dedicated to engineering firms and . Circulating pumps SR3 REPLACEMENT PUMP HEAD SR3 - RM4 R2SD R2X - R2B R2C - R4C R2CD - R4CD R2T - R4T R2TD - R4TD A2L - A4L A2LD - A4LD ACCESSORIES

The Circulating Pump Control System Design Based on .

The Circulating Pump Control System Design Based on .

The Circulating Pump Control System Design Based on LOGO! YAN Guang-xin CHAO Qin CHEN Zhi-wei (Electrical Engineering Institute of Xinjiang University,Urumqi 830008) he article introduces the control principle, hardware wiring, software designing and virtue of circulating pump control system being designed by the Frequency Converter-Soft .

Designing Domestic Hot Water Recirculation Systems: Part 2 .

Designing Domestic Hot Water Recirculation Systems: Part 2 .

This pump will cost about 4 times as much as the standard booster but will eliminate the overheating and reduce the speed when there is usage in the building. Next week we will look at the control of the circulating pump. Check out the rest of the Designing Domestic Hot Water Recirculation Systems Series: Part 1: Determining the Flow Rate

Consulting - Specifying Engineer | Sizing, selecting pumps .

Consulting - Specifying Engineer | Sizing, selecting pumps .

The most typical application is circulating and distributing chilled or hot water for a variety of different building or facility load requirements. . The first step in designing any efficient, effective HVAC system for a building or campus is to perform accurate building load calculations and energy modeling. . The pump control setpoints .

Hot Water Recirculation in High-Rise Buildings

Hot Water Recirculation in High-Rise Buildings

2014-3-15 · The pump must act not only as a recirculation pump but also as a pressure booster. Pump P3 in Figure 1 would be sized around 15 GPM @ 210 FT to overcome friction losses and the static height of the building, and it must be capable of pumping potable water but the standard 175 psi seals become marginal and pump efficiency at this low flow is .